Sabic PP FPC70 (old BEX14092 )
Informacije o izdelku
As part of SABIC PP FLOWPACT portfolio, FPC70 delivers high top load performance (potential downgauging) with a superior stiffness / impact balance. It is nucleated and has good antistatic performance with easy demoulding. This grade has good flow behavior, and it was designed for high-speed injection moulding process, potentially enabling very cost efficient processing on the basis of easy mould filling and very short cycle times.
Applications: SABIC PP FPC70 is typically used in rigid packaging applications for both food and non-food industries. This includes packaging for yellow fats, cheese spreads, dairy, frozen, chilled and ambient food, household chemicals and paints among others. It can be also used in several applications in the caps & closures as well in housewares. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications.
Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com This product is not intended for and must not be used in any pharmaceutical/medical applications.
Technical Properties
| Gostota (Density) (g/cm³) | 0.905 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 70(230°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | 3.0(-20°C, Type 1, Notch A) 4.0(0°C, Type 1, Notch A) 6.0(23°C, Type 1, Notch A) |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
