Sabic PP PHC28
Informacije o izdelku
PHC28 is the new development of SABICs very high impact PHC series. The grade combines very high impact resistance, also at low temperatures, with a good stiffness and offers very good flow properties. By its design it is offering potential of cycle time reduction, of down gauging and easiness of processing. PHC28 is highly suitable for injection moulding of applications requiring high impact from low to thick wall thickness such as suitcase shells, electronic equipment and automotive parts. PHC28 is putting the combined stiffness and flow of very high impact copolymers to a next level .
Technical Properties
| Gostota (Density) (g/cm³) | 0.905 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 20(230°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | No Break(23°C, Type 1, Notch A) 7.0(-20°C, Type 1, Notch A) 12(0°C, Type 1, Notch A) |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic PP PHC28
