
DOW LDPE 150E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilising melt temperatures between 170 and 230 deg C. DOW LDPE 150E Low Density Polyethylene Resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties.
Note: DOW LDPE 150E Low Density Polyethylene Resin should comply with:
EU, No 10/2011
U.S. FDA 21 CFR 177.1520(c)2.2
U.S. FDA-DMF
Consult the regulations for complete details
Applications:
Heavy duty industrial film
| Gostota (Density) (g/cm³) | 0.921 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 0.25(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
| DMF | Unspecified Rating |
|---|---|
| EU | No 10/2011 |
| FDA | 21 CFR 177.1520(c) 2.2 |
