Bynel 46E1060
Informacije o izdelku
BYNEL 4600 series resins are anhydride-modified, very low-density polyethylene (VLDPE) resins. All 4600 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process
polyethylene (PE) resins.
BYNEL 46E1060 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions.
Composition
Ultra High% By Weight Maleic Anhydride
Graft levels are defined as:
Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
Characteristics / Benefits
Physical properties of BYNEL 4600 series resins are typical of very low-density polyethylene resins with similar density and melt index values.
Applications
BYNEL 4600 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers.
BYNEL 4600 series resins can be used in coextrusion processes including:
blown film
cast film/sheet
blow molding
melt and solid phase thermoforming
sheet and tubing
Technical Properties
| Gostota (Density) (g/cm³) | 0.870 0.870 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 3.0(190°C/2.16 kg) 3.0(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih trgov.
Specifikacije
Za ta produkt ni navedenih specifikacij
