Braskem HDPE HD7255LS-L
Informacije o izdelku
HD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation.
Application: Bins, Boxes for fruits and vegetables, Boxes for fish, general purpose boxes and caps and closures for general use.
Process: Injection Molding
Blagovna znamka: Braskem HDPEProizvajalec: BraskemTip polimera: HDPEPolnilo: Brez polnilaOblika: Granules
Technical Properties
| Gostota (Density) (g/cm³) | 0.945 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 4.5(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | 40(3.00 mm, Compression Molded) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialBraskem HDPE HD7255LS-L
