Braskem SLL318-GREEN LLDPE
Informacije o izdelku
SLL318 is a Linear Low Density Polyethylene developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866.
Applications: Stretch films; liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes; insulation for low and medium tension XLPE wires and cables.
Process: Recommended processing conditions for film extrusion about 170 - 210 deg C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.
Technical Properties
| Gostota (Density) (g/cm³) | 0.918 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 2.7(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialBraskem SLL318-GREEN LLDPE
