Braskem SHA7260-GREEN HDPE
Informacije o izdelku
SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased content of this grade is 94%, determined according to ASTM D6866.
Application: Pails & basins, Caps & Closures, Toys, Lids, Thin-walled parts and Housewares. Rigid containers for cosmetics and pharmaceutical applications (complies with USP 37).
Process: Injection Molding
Technical Properties
| Gostota (Density) (g/cm³) | 0.955 0.955 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 20(190°C/2.16 kg) 20(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | 20(3.00 mm, Compression Molded) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | 8.0(23°C, Compression Molded) |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialBraskem SHA7260-GREEN HDPE
