Hostaform C9021 SW
Informacije o izdelku
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002, K10 POM copolymer Injection molding type, special modified with anti-friction additives for prevention of squeaking noise; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. UL-registration in natural and black and a thickness more than 1.5 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1,5 mm.
Ranges of applications: For sliding combinations with low wear and low coefficient of friction, prevents squeaking noise. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
Technical Properties
| Gostota (Density) (g/cm³) | 1.42 |
| Stopnja pretoka (Flow Rate) (g/10 min) | - |
| Razred gorljivosti (Flame Rating) | HB(3.2 mm) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
