Pulse AX50 UVB
Informacije o izdelku
Overview
PULSE™ AX50 is a PC/ABS especially designed for automotive interior and exterior applications, which are direct surface in-mould-coated in a closed injection mould with e.g. polyurethane/polyurea formulation. PULSE™ AX50 as substrate provides excellent adhesion with the lacquer on as moulded parts, which is retained or improved after thermo-oxydative ageing, hydrolysis, climate change, hot light ageing and sun simulation test.
Benefits
Very good adhesion with polyurethane and polyurea.
High Heat.
Excellent ductility at 23 °C and Low Temperatures.
Applications
Direct surface in-mould-coating automotive interior and exterior applications
Govt. and Industry Standards
DBL 9202.30
Technical Properties
| Gostota (Density) (g/cm³) | 1.09 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 16(260°C/5.0 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialPulse AX50 UVB
