Altuglas V825TL
Informacije o izdelku
OVERVIEW: Standard clear ALTUGLAS™ PMMA resins exhibit key properties that make them the industry standard for applications needing a combination of high transparency and gloss along with UV and scratch resistance.
TRINSEO offers a wide range of grades adapted to injection molding and extrusion processes.
DESCRIPTION:
This clear thermoplastic material offers:
Excellent Optical properties - Very high Light Transmittance (92% LT / 0.5% haze)
Outstanding resistance to mechanical damage and discoloration by ultraviolet rays: years outdoor exposure has no visible effect on ALTUGLAS™ PMMA.
Very high surface hardness (Rockwell M-Scale) and therefore scratch resistance ensuring a lasting premium look.
Higher heat resistance than impact-modified grades (Vicat B50 up to 108°C).
Good stiffness.
Ease of colouring (PMMA based MB required for non-opaque colours to avoid optical defects).
This lubricated version is specifically designed to offer enhanced granules intake into injection molding equipment during the feeding step.
TYPICAL MARKETS / APPLICATIONS:
Automotive & Transportation
Health, Hygiene & Beauty
Building & Construction
Composites & advanced materials
Consumer Electronics
ALTUGLAS™ PMMA V825TL is both an injection and extrusion resin with high heat resistance.
Technical Properties
| Gostota (Density) (g/cm³) | 1.19 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 2.8(230°C/3.8 kg) |
| Razred gorljivosti (Flame Rating) | HB(3.2 mm) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih trgov.
Za ta izdelek ni na voljo nobenih tehnologij.
Specifikacije
Za ta produkt ni navedenih specifikacij
