Dow LDPE 525E R
Informacije o izdelku
DOW LDPE 525E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor anti-block additives.
Note: DOW LDPE 525E Low Density Polyethylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)2.2 and with EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for whether the use complies with all relevant regulations.
Further Complies with:
ISCC PLUS certification for renewable-based plastics
Applications:
High clarity lamination films.
Label Films
Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products.
High clarity tissues overwrap film.
Produce bags.
Food packaging films.
Technical Properties
| Gostota (Density) (g/cm³) | 0.930 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 3.2(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih trgov.
Za ta izdelek ni na voljo nobenih tehnologij.
Specifikacije
Za ta produkt ni navedenih specifikacij
