Braskem HDPE SHC7260LS-L
Informacije o izdelku
SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased content of this grade is 94%, determined according to ASTM D6866.
Application:
Pallet, Safety helmet, General use crates, Industrial crates
Blagovna znamka: Braskem HDPEProizvajalec: BraskemTip polimera: HDPEPolnilo: Brez polnilaOblika: Unknown
Technical Properties
| Gostota (Density) (g/cm³) | 0.959 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 7.2(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | 35(3.00 mm, Compression Molded) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih tehnologij.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialBraskem HDPE SHC7260LS-L
