Gur 2122 M EP
Informacije o izdelku
UHMW-PE powder grade: special particle morphology Samples of the above listed GUR® product are tested according to the requirements described in monograph 3.1.3. of Ph.Eur. 10.0 “Polyolefines'. The results of those tests indicated the sampled material was compliant with monograph 3.1.3 of Ph.Eur. 10.0. Please note that the manufacturer or seller of parts and articles made out of the above mentioned products have to take the full responsibility regarding applicable legal requirements.
Technical Properties
| Gostota (Density) (g/cm³) | 0.930 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 0.10(190°C/21.6 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih trgov.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialGur 2122 M EP
