Sabic LLDPE M500026
Informacije o izdelku
SABIC LLDPE M500026 is a high flow, linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR), mouldability and gloss.
Typical applications.
Injection Molding: SABIC LLDPE M500026 is typically used for injection moulding of containers, reclosure lids and fast cycle, deep draw injection moulding applications, which takes advantage of its high flow properties. Also, the higher melting point of the material allows for high end-use temperature when compared with conventional polyethylenes of equal density.
Masterbatch Compounding: SABIC LLDPE M500026 resin is typically used for injection moulding masterbatch where a high filler acceptance is required combined with a good flow.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Technical Properties
| Gostota (Density) (g/cm³) | 0.926 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 50(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | 450(23°C, Method A) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
