Sabic LDPE 2200H0
Informacije o izdelku
SABIC® LDPE 2200H0 is a grade with a low melt flow range and contains no additives. This grade has a good draw down ability and very good optical properties.
Application
SABIC® LDPE 2200H0 is typically used for thin film applications combining high strength and good optical properties.
Film properties
Film properties have been measured at film of 50 µm with a BUR of 3.
The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Blagovna znamka: Sabic LDPEProizvajalec: SabicTip polimera: LDPEPolnilo: Brez polnilaOblika: Unknown
Technical Properties
| Gostota (Density) (g/cm³) | 0.922 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 0.33(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
No markets available for this product.
No technologies available for this product.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic LDPE 2200H0
