Sabic HDPE PCG5421
Informacije o izdelku
SABIC HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC HDPE PCG5421 is typically used for the blow moulding of healthcare packaging (bottles and cans). The product features a good stiffness/ESCR balance combined with good process ability.
Compliance to regulations
SABIC HDPE PCG5421 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
Blagovna znamka: Sabic HDPEProizvajalec: SabicTip polimera: HDPEPolnilo: Brez polnilaOblika: Granules
Technical Properties
| Gostota (Density) (g/cm³) | 0.954 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 0.16(190°C/2.16 kg) 0.89(190°C/5.0 kg) 20(190°C/21.6 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | 6.0(-30°C, Notch A, Compression Molded) 14(23°C, Notch A, Compression Molded) |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic HDPE PCG5421
