Sabic HDPE M864SE (old M80064SE)
Informacije o izdelku
SABIC HDPE M864SE is an UV stabilized, high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is typically used for injection moulding applications where rigidity, toughness and warp resistance are required.
Typical applications.
SABIC HDPE M864SE is typically used for the manufacture of injection moulded cases, crates, trays, industrial pails and other similar items.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Blagovna znamka: Sabic HDPEProizvajalec: SabicTip polimera: HDPEPolnilo: Brez polnilaOblika: Granules
Technical Properties
| Gostota (Density) (g/cm³) | 0.964 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 8.0(190°C/2.16 kg) 22(190°C/5.0 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | 4.0(23°C, Notch A, Compression Molded) |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic HDPE M864SE (old M80064SE)
