Nordel IP 5565
Informacije o izdelku
NORDEL IP 5565 Hydrocarbon Rubber is an amorphous, high diene ethylene-propylene-diene terpolymer (EPDM) grade designed for extruded applications requiring fast cure rates. It is ideally suited for continuously cured dense and sponge profiles. Molded applications will also benefit from the fast cure response, allowing shorter cycle times.
Main Characteristics:
Amorphous
High diene
High molecular weight
Fast cure
Good low temperature properties
Complies with
-- U.S. FDA 21 CFR 175.105 (Adhesives only).
-- Consult the regulations for complete details.
Applications:
Extruded profiles/weather strip
Sponge profiles
Technical Properties
| Gostota (Density) (g/cm³) | 0.860 |
| Stopnja pretoka (Flow Rate) (g/10 min) | - |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
| FDA | 21 CFR 175.105 |
|---|
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialNordel IP 5565
