Sabic LDPE HP2025NN
Informacije o izdelku
LDPE HP2025NN Low Density Polyethylene Resin has been designed with and optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, LDPE HP2025NNdisplays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, LDPE HP2025NN gives and ideal balance between cell growth and stabilization to allow the production of very low density products without voids. The resin Does not contain any slip or antiblock additive. LDPE HP2025NN has very low level of gels
Blagovna znamka: Sabic LDPEProizvajalec: SabicTip polimera: LDPEPolnilo: Brez polnilaOblika: Unknown
Technical Properties
| Gostota (Density) (g/cm³) | 0.923 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 2.0(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Za ta izdelek ni na voljo nobenih tehnologij.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic LDPE HP2025NN
