Sabic LDPE 2404EC
Informacije o izdelku
SABIC® LDPE 2404EC is a tubular LDPE grade for extrusion coating. Its special molecular structure gives a good combination of processing and end-performance properties. SABIC® LDPE 2404EC can be used on low and (very) high line speed extrusion coating and lamination processes. Due to its excellent draw down performance and good adhesion, very thin coating layers can be applied on the substrate.
Application
SABIC® LDPE2404EC is typically used in extrusion coating and lamination applications, such as liquid packaging, imaging, food packaging, release liners and building & construction. It can be used for coatng on paper board, aluminium foil and other substrates.
Due its relative high density (compared to SABIC LDPE 2005EC) it has a higher temperature resistance.
Properties
Mechanical properties determined on compression moulded specimen (2 mm thick) at test speed of 50 mm/min. Film properties have been measured at film of 25 µm, produced on lab scale equipment. Water vapour permeability at 38 °C and 90 % RH per 24 h. Oxygen permeability at 23 °C and 0 % RH per 24 h.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Technical Properties
| Gostota (Density) (g/cm³) | 0.924 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 3.5(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
No technologies available for this product.
Specifikacije
Za ta produkt ni navedenih specifikacij
