Sabic HDPE PCG453
Informacije o izdelku
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.
SABIC® HDPE PCG453 is typically used for the injection molding of healthcare packaging, caps and closures and other parts for medical packaging. This grade has a very high impact resistance, even at low temperatures.
Compliance to regulations.
SABIC® HDPE PCG453 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).
Blagovna znamka: Sabic HDPEProizvajalec: SabicTip polimera: HDPEPolnilo: Brez polnilaOblika: Unknown
Technical Properties
| Gostota (Density) (g/cm³) | 0.953 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 4.7(190°C/2.16 kg) 13(190°C/5.0 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | 4.0(23°C, Notch A, Compression Molded) |
Market in tehnologije
No technologies available for this product.
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialSabic HDPE PCG453
