Braskem HDPE HC7260LS-L
Informacije o izdelku
HC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action.
Application: Industrial containers, Safety Helmets, Toilet seats, Housewares, Toys, Lids, Pallets, Boxes for beverages bottles, caps and closures.
Process: Injection Molding
Blagovna znamka: Braskem HDPEProizvajalec: BraskemTip polimera: HDPEPolnilo: Brez polnilaOblika: Granules
Technical Properties
| Gostota (Density) (g/cm³) | 0.959 |
| Stopnja pretoka (Flow Rate) (g/10 min) | 7.2(190°C/2.16 kg) |
| Razred gorljivosti (Flame Rating) | - |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ASTM 256 (J/m) | 35(23°C, 3.00 mm, Compression Molded) |
| Udarni preskus z zarezo po Izodu (Notched Izod Impact) ISO 180 (kJ/m²) | - |
Market in tehnologije
Specifikacije
Za ta produkt ni navedenih specifikacij
Zahteva za ponudbo
Za ogled vseh barv, ponudb in informacijah o odpoklicih, se prosim prijavite.
Izberite barvo
MaterialBraskem HDPE HC7260LS-L
