Isplen PB110H2E

Sobre este produto

ISPLEN® PB110H2E is a high melt viscosity propylene heterophasic copolymer with a reinforced formulation designed for extrusion process. Due to their good flow and outstanding mechanical properties it is suitable to be processed into pipes and its good flexural modulus is specially intended for extrusion of doubled corrugated drainage and sewage pipes

The ISPLEN® PB110H2E characterized by high impact strength at low temperatures and stress cracking resistance assure the good performance of this material under critical conditions.

It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer.

TYPICAL APPLICATIONS
Structured doubled wall pipes for underground drainage and sewage without pressure.
Corrugated pipes in general.

Recommended melt temperature range from 205-225 °C. Processing conditions should be optimised for each production line.

ISPLEN® PB 110 H2E is a very low melt flow propylene heterophasic copolymer with a reinforced formulation for extrusion processes, and a high thermal stabilisation. His crystalline structure gives a high rigidity and very high tensile strength resistance. Its flow characteristics and mechanical properties make it specially adapted for high thickness and good superficial shine extrusion products

It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer.

TYPICAL APPLICATIONS
In extrusion process that may require high melt viscosity and particularly high tensile properties, such as:
Boards and Profiles
Blow-molding
Sheet extrusion with high superficial shine.
Pipes.
Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Mercados e tecnologias

Especificações