Sabic LLDPE 6318BE
Over dit product
SABIC® LLDPE 6318BE is a hexene linear low density polyethylene resin for cast film applications. The product is typically formulated for optimum thermal stability at high temperatures used in cast film extrusion. Films produced from this grade exhibit good optical properties, toughness, puncture resistance and
tear strength.
Application
SABIC® LLDPE 6318BE resin is typically used for pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. The grade is also suggested for blending with ethylene/butene copolymer LLDPE and LDPE for improving strength.
Film properties
Properties are determined on 20 µm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed 450 m/min.
Processing conditions
SABIC® LLDPE 6318BE is extrudable with conventional cast film extrusion equipment. Temperatures 250- 300°C.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Technical Properties
| Dichtheid (g/cm³) | 0.920 |
| Flow Rate (g/10 min) | 3.2(190°C/2.16 kg) |
| Vlamclassificatie | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Markten en technologieën
Er zijn geen technologieën beschikbaar voor dit product.
Specificaties
Geen specificaties gevonden voor dit product
