Bynel 41E710
About this Product
BYNEL™ Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
BYNEL™ 41E710 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions.
BYNEL™ 4100 series resins adhere to a variety of materials. They are most often used to adhere to EVOH, polyamide, PE and ethylene copolymers.
Series 4100 resins can be used in coextrusion processes including:
blown film
cast film/sheet
blow molding
melt and solid phase thermoforming
sheet and tubing
LLDPE resins are known for their temperature resistance, clarity and toughness.
These physical properties make the 4100 series resins work well in applications such as:
boil-in-bag structures
blow molded containers in which drop strength is important
bag-in-box films
film where LLDPE is the heat seal layer
Adhesion to EVOH, Nylon, PE
Bottles and Drums Use: Drums, Food, Household Industrial Chemicals (HIC) / Agriculture Bottles, IBC
MAH Graft Level High - concentrate
an alternative for Bondyram 4110. Halal certified
Technical Properties
| Density (g/cm³) | 0.922 0.922 |
| Flow Rate (g/10 min) | 2.7(190°C/2.16 kg) 2.7(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Markets and Technologies
Specifications
No specifications are listed for this product
