
Materials, polymers, or plastics derived wholly or partially from biomass such as plants, food waste or microorganisms. Monomers derived from such sources can produce polymers with identical performance to their fossil-based counterparts, offering a drop-in solution to existing products.
Polymers that can be decomposed by microorganisms, such as bacteria and fungi, into natural substances like water, carbon dioxide, and biomass. This often demands specific environmental conditions that can only be met by industrial composting facilities.
A collaborative European initiative with over 180 European companies as members, representing the entire flexible packaging value chain.
A range of advanced recycling technologies that break down plastic waste into its chemical building blocks (monomers), which can then be used to produce new plastics or chemicals with the performance of prime or virgin polymers.
An economic system aimed at minimising waste and making the most of resources. It involves designing products for durability, reuse, recycling and remanufacturing to keep materials in use for as long as possible.
A subset of biodegradable materials that will break down completely, under specific composting conditions that can be achieved in natural environments, within a defined timeframe, leaving no toxic residue.
A specific boundary for a Life Cycle Assessment (LCA) of a product. It assesses the environmental impacts of a product from the extraction of raw materials (the "cradle") up to the point it leaves the factory (the "gate").
A specific boundary for a Life Cycle Assessment (LCA) of a product. I refers to the full life cycle assessment of a product or materials, from its raw material extraction (the "cradle") through to its manufacturing, distribution, use, and finally its disposal (the "grave").
A European Union directive that aims to make companies more accountable for their impact on people and the planet throughout their supply chains. It follows similar laws to the German Supply Chain Due Diligence Act (LkSG) but will have a broader scope across the EU. Companies will face potential penalties for non-compliance.
Defined by the European Commission as the responsibilities of enterprises for their impact on society. Companies can become socially responsible by integrating social, environmental, ethical, consumer, and human rights concerns into their business strategy and operations and by following the law.
A product design strategy that aims to maximise the recovery of valuable materials from waste streams, reduce the need for virgin resources, and minimise the environmental impact associated with disposal. This is a key strategy in moving towards a more circular economy.
In integration of environmental considerations into the design process of products and services, aiming to minimise their environmental impact throughout their life cycle. This includes designing for recyclability, durability, and reduced material use.
Discover how to successfully switch to recycled engineering thermoplastics for high-end parts, and what that shift means for your daily work and your products.
Learn what changes to expect when moving from virgin to recycled material, and best practices from design to production to maintain quality and consistency.
A regulation set by the EU that encompasses a set of rules for vehicle design and manufacture. The regulation enforces circular design, the incorporation of recycled content, smart collection at vehicle end-of-life, greater recovery of raw materials, and better industry cooperation.
A framework that helps businesses to lower their environmental impact. It guides businesses in identifying, reducing and managing factors such as carbon footprint, waste, and consumption of resources.
A European Standard that aims to increase the recyclability of packaging in existing recycling streams. The standard contains guidelines to support producers during the initial design stage of their product, as well as protocols for testing and verifying the design. This standard will be the technical reference for elements of the PPWR.
A European Standard that outlines the testing procedure and approval criteria to validate the biodegradability and compostability of packaging products. Certification requires the product to pass biodegradability, disintegration, heavy-metal and chemical limits, and ecotoxicity & compost quality criteria.
A European Standard that defines how plastics must be tested and assessed to be called "organically recoverable". The testing procedures defined cover biodegradability, disintegration during biological treatment, effect on the biological treatment process and effect on the quality of the resulting compost.This standard supports brands in making compostability claims for their products. For packaging applications, refer to EN 13432.
A European Standard that guides how recycled plastics should be produced, detailing collection, sorting, cleaning and reprocessing procedures to ensure traceability and accurate calculation of recycled content in products. This standard applies to all businesses in the value chain, including polymer manufacturers, recyclers, moulders and packaging producers.
A third-party verified document that gives an objective and comparable view on the environmental performance of a product or service.
A policy defined by the UN Environment Programme as an approach that makes producers responsible for their products in their entire life cycle. This places the responsibility for a product's end-of-life in the hands of the producer, with the aim of reducing waste and encouraging the recycling and reuse of materials.
A set of criteria used to evaluate how a corporation impacts society and how sustainable its business practices are. Investors and stakeholders use ESG factors increasingly to assess risks and opportunities.
A directive that defines how businesses must report on social and environmental information. This set of standards encourages businesses to report their impacts on people and the environment, encouraging them to meet the objectives of the European Green Deal.
Gases in the earth's atmosphere that trap heat. Key GHGs include Carbon Dioxide (CO₂), Methane (CH₄), and nitrous oxide (N₂O). Reporting on GHG emissions is crucial for understanding the climate impact of different products and processes.
A global standard used for measuring, reporting and managing greenhouse gas emissions.
An international, independent organisation that standardises how businesses must report on sustainability.
A globally recognised system that certifies chain-of-custody and traceability of renewable and recycled feedstocks, from the use and manufacture of sustainable feedstocks to the end product. One of the world’s largest certification systems, ensuring adherence to its independent multi-stakeholder certification process. The system aims to verify that the materials used across various sectors are environmentally, socially and economically sustainable.
An internationally recognised standard for Environmental Management Systems "EMS".
International standards defining the framework of Life Cycle Assessments (LCA).
ISO 14040 provides the foundation for how to structure an LCA, outlining the four key phases involved. In short, it helps to plan an LCA.
ISO 14044 provides the guidelines for the specific processes involved in the LCA process. In short, it helps with the execution of an LCA.
A global standard-setting body with the aim of making a globally compatible baseline of sustainability disclosures; what companies must disclose in their financial reports regarding sustainability issues that affect company value, cash flow and risk.
A standardised way of quantifying the environmental impacts of a product or service from raw material extraction, through manufacturing and use, all the way to end-of-life (recycling, incineration, landfill, etc.).
A methodology used to track the flow of sustainable feedstocks (e.g. mechanically recycled, bio-based or chemically recycled) through industrial manufacturing processes, where they are combined with conventional fossil-based feedstocks. This process enables sustainable content to be attributed to end products based on input ratios.
The process of physically sorting plastic waste, washing it, shredding it, and reprocessing it into polymer granules that can be reprocessed into new products.
An international programme designed for the plastics industry to prevent the loss of plastic pellets, flakes, and powders into the environment. Its ultimate goal being to implement best practices in handling and containment to achieve zero pallet loss.
A measure of the total greenhouse gas (GHG) emissions produced in a product's entire life cycle, from raw material extraction to product end-of-life and disposal.
Materials, such as polymers, are sourced from consumer waste that has been diverted from landfills or incineration.
A measure of the environmental impact of a product or service across its entire lifespan, including. Utilising LCAs, it captures carbon footprint, material consumption, water and energy demand, air pollution, and end-of-life waste streams.
Materials, such as polymers, are made from waste generated during industrial manufacturing processes (e.g. scrap, rejects). This is also known as pre-consumer recycled content.
A regulation set by the European Union (EU) that aims to reduce the environmental impact of packaging. It replaces the previous EU Packaging Directive and applies directly to all EU member states. The PPWR aims to reduce packaging waste, promote reuse and recycling, and incorporate recycled content into packaging products.
A non-profit, cross-industry initiative that advances recycled plastic traceability and the use of recycled plastics in products in Europe. The RecyClass certification schemes help members in the entire value chain meet sustainability objectives, proving the origin and traceability of feedstock from recycler to moulder.
Raw materials derived from sources that can be replenished over time, such as biomass (from plant-based oils, sugars, etc.), used in the production of chemicals, monomers and polymers.
A category of Greenhouse Gas emissions defined by the Greenhouse Gas Protocol as "Direct emissions from sources on site". These are emissions made directly by the company. For example the emissions generated by running boilers, furnaces, machines and vehicles.
A category of Greenhouse Gas emissions defined by the Greenhouse Gas Protocol as "Indirect Emissions from Energy/Utilities". The emissions from the generation of electricity, heating & cooling, purchased for use in the company's operations.
A category of Greenhouse Gas emissions defined by the Greenhouse Gas Protocol as "Other Indirect Emissions". These are all indirect emissions, not included in scope 2, that don't occur within the company but elsewhere in the value chain and are therefore indirectly responsible for. This includes employee commuting, use of sold products, distribution & end of life treatment.
A document used within the ISCC PLUS system to provide information about the certified environmental attributes of a specific batch of material. According to ISCC PLUS a sustainability declaration is a delivery document containing relevant information about the certified material that must be issued by the supplier for each delivery of certified material.
A collection of 17 global sustainability goals designed by the United Nations to be a "blueprint to achieve a better and more sustainable future for all".
A set of EU rules on how to handle Waste Electrical and Electronic Equipment for a more circular economy.
Our technical and commercial team is available to discuss material requirements, recycled content targets, regulatory obligations, and supply feasibility.
11 The Valley Centre
Gordon Road
High Wycombe
Buckinghamshire
HP13 6EQ
United Kingdom

