Bynel 40E1053
About this Product
BYNEL 4000 series resins are anhydride-modified, high-density polyethylene resins.
BYNEL 4000 series resins are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins.
BYNEL 40E1053 is a grade with a higher level of anhydride modification, and is mainly intended for use as a component in a blend with other polyolefin resins. It is not intended for extrusion in its pure form in typical extrusions or coextrusions.
Composition
Ultra High% By Weight Maleic Anhydride
Graft levels are defined as:
Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
Characteristics / Benefits
Physical properties of BYNEL 4000 grades are typical of high density polyethylene resins with similar density and melt index values.
Applications
BYNEL Series 4000 resins are excellent moisture barriers and have a good hydrocarbon resistance. This unique combination of properties makes them useful in a variety of coextrusion applications. HDPE/EVOH tubing and HDPE/Polyamide bottles for agricultural chemicals are just two examples.
BYNEL 4000 series resins are most often used in coextrusion with EVA, EVOH, polyamide and PE.
Technical Properties
| Density (g/cm³) | 0.958 0.958 |
| Flow Rate (g/10 min) | 2.0(190°C/2.16 kg) 2.0(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
Markets and Technologies
No markets available for this product.
Specifications
No specifications are listed for this product
