Resinex RX 102
About this Product
Overview:
RX 102 NATURAL is the same Dowlex 2631.10UE, only the label on the bags is different.
When we use Dowlex 2631UE or 2631.10UE to make colours, black or special effects, the resulting product is named:
RX 102 "colour" xxxx (xxxx is a unique 4 digit number for that colour).
There are many versions of RX 102 available, Natural, Black, Colour compounds, Colour dry-blends, Special Effects, etc
Some grades have special approvals e.g. Natural and Black have WRAS potable water approval
Please check the documents to see which grade has what aproval.
Applications / Grade Selection:
As with all rotomoulding applications, segmentation by application type is far too specific since the range of grades is so limited.
We can divide the whole of the roto market into 3 segments:
Large Tanks
Specialities e.g. Boats and Kayaks, Flare Retardant, Conductives, Foamm etc
Everything else
For large tanks, a typical tank grade should be used e.g. Dowlex NG2432UE or XZ89342.00
For everything else, either Dowlex 2629UE or Dowlex 2631UE should be used.2629 has lower flow so will be tougher, and 2631 will allow more complex shapes to be moulded.
The starting point is also to counter-type what is currently being used.
Typical Datasheet Information:
RX 102 NATURAL Polyethylene Resin is designed for general purpose rotational moulding applications and is suitable for
applications requiring good environmental stress cracking resistance and impact strength combined with low warping and
excellent processability.
RX 102 NATURAL is fully heat and UV stabilised resulting in a very wide processing latitude, good colour retention and
long life expectancy.
RX 102 NATURAL is approved by TÜV for use in Diesel fuel tanks under international regulation ECE R34 annex 5 and
European directive 2006/96/EC.
RX 102 NATURAL is approved by WRAS / WRc for use in hot and cold drinking water applications upto 70ºC under
British Standards regulation BS6920 (certificate №: 0510506).
RX 102 NATURAL should comply with food contact regulations FDA regulation 177.1520©3.1a and with European EUDirective
2002/72/EC when processed according to good manufacturing practices for food contact applications.
Technical Properties
| Density (g/cm³) | - |
| Flow Rate (g/10 min) | - |
| Flame Rating | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Markets and Technologies
Specifications
No specifications are listed for this product
