Resinex RX 101

Bezüglich dieses Produkt

Overview:

RX 101 NATURAL is the same Dowlex 2629.10UE, only the label on the bags is different.

When we use Dowlex 2629UE or 2629.10UE to make colours, black or special effects, the resulting product is named:
RX 101 "colour" xxxx (xxxx is a unique 4 digit number for that colour).

There are many versions of RX 101 available, Natural, Black, Colour compounds, Colour dry-blends, Special Effects, etc
Some grades have special approvals e.g. Natural and Black have WRAS potable water approval
Please check the documents to see which grade has what aproval.

Applications / Grade Selection:

As with all rotomoulding applications, segmentation by application type is far too specific since the range of grades is so limited.
We can divide the whole of the roto market into 3 segments:

1. Large Tanks

2. Specialities e.g. Boats and Kayaks, Flare Retardant, Conductives, Foamm etc

3. Everything else

For large tanks, a typical tank grade should be used e.g. Dowlex NG2432UE or XZ89342.00
For everything else, either Dowlex 2629UE or Dowlex 2631UE should be used.2629 has lower flow so will be tougher, and 2631 will allow more complex shapes to be moulded.

The starting point is also to counter-type what is currently being used.

Typical Datasheet Information:

RX 101 NATURAL Polyethylene Resin is designed for high performance rotational moulding applications and is suitable for applications requiring excellent environmental stress cracking resistance and impact strength combined with low warping and good processability.
RX 101 NATURAL is fully heat and UV stabilised resulting in a very wide processing latitude, good colour retention and long life expectancy.
RX 101 NATURAL is approved by TÜV for use in Diesel fuel tanks under international regulation ECE R34 annex 5 and European directive 2006/96/EC.
RX 101 NATURAL is approved by WRAS / WRc for use in hot and cold drinking water applications upto 70ºC under British Standards regulation BS6920 (certificate №: 0510507).
RX 101 NATURAL should comply with food contact regulations FDA regulation 177.1520(c)3.1a and with European EUDirective 2002/72/EC when processed according to good manufacturing practices for food contact applications.

Märkte und Technologien

Spezifikationen