Dow Wire & Cable DFDK-6050 NT
Om dette produkt
Dow Electrical & Telecommunications DFDK-6050 NT is an enhanced linear low density polyethylene (LLDPE) resin which can be used as a cable jacketing material when properly colored and stabilized. The material exhibits a combination of properties like improved toughness, strength and high heat resistance, while demonstrating good flexibility, excellent environmental stress crack resistance and excellent processing properties. With its well balanced mechanical and processing characteristics DFDK-6050 NT is an excellent jacket grade for power cables (LV and MV) and telecommunication cables.
Processing Recommendations:
DFDK-6050 NT can be extruded using a range of conventional commercial jacketing extruders. Typical extruder barrel temperatures required depend on many factors such as extruder size.
A good starting point is: 140/190/200/200/200/200 deg C with melt temperatures below 250 deg C.
Applications:
DFDK-6050 NT is a natural resin that needs to be blended with carbon black or colored pigment masterbatches with a suitable UV - stabilizer to ensure sufficient weathering resistance. The addition of a proper antioxidant level is required for long term ageing resistance. A carbon black masterbatch with extra antioxidant for use with DFDK-6050 NT is Dow Electrical & Telecommunications DFDK-6010 BK.
Specifications:
The polymeric material meets the following raw material specification(s):
-- ASTM D 1248, Type I, Class A, Category 3 Grade J3, E4.
-- ISO 1872-PE, KGN 18-D012
In combination with a proper carbon black or colour masterbatch, jackets made from Dow AXELERON GP K-6050 NT, using industry standard commercial extrusion practice, should meet the following cable specification(s):
-- EN 50290-2-24, Grade LLD
-- IEC 60708
-- IEC 60502 ST3
-- IEC 60840 ST3
-- HD 620 S2 Part 1, Table 4B, Compound DMP 10, 14, 17
-- BT M132
Consult the regulations for complete details.
Technical Properties
| Vægtfylde (g/cm³) | 0.920 |
| Flowhastighed (g/10 min) | 0.90(190°C/2.16 kg) |
| Flammerating | - |
| Indskåret Izod ImpactASTM 256 (J/m) | - |
| Indskåret Izod ImpactISO 180 (kJ/m²) | - |
Markeder og teknologier
Specifikationer
| ASTM | D 1248, I, Class A, Cat. 3, Grade E4 |
|---|---|
| BT | M 132 |
| EN | 50290-2-24 |
| HD | 620 S2 |
| IEC | 60502 Type ST3 |
| IEC | 60708 |
| IEC | 60840 Type ST3 |
| ISO | 1872 PE KGN 18D012 |
