Braskem SBC818-GREEN LDPE
За този продукт
SBC818 is a low density polyethylene developed for coating process, it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866.
Applications:
Extrusion coating. Injection of general parts and carrier for masterbatches.
Recommended process conditions:
Extrusion coating
Extruder type:
Screw W/D ratio 20:1
Compression ratio, 3 to 4:1
Temperature profile on horizontal extruder:
Barrel: from 150 to 340 deg C
Die and melt mass: from 300 to 340 deg C
Technical Properties
| Плътност (g/cm³) | 0.918 |
| Flow Rate (g/10 min) | 8.3(190°C/2.16 kg) |
| Flame Rating | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Пазари и технологии
Спецификации
Не са посочени спецификации за този продукт
Заявка за оферта
За да видите цветове, оферти и споразуменията си за доставки, моля, влезте в системата.
Изберете цвят
ПродуктBraskem SBC818-GREEN LDPE
